Cruise Control Not working in 2021 GC L Summit

[rabletD]

Hi,

Does anyone facing this issue of Cruise Control not working and also the forward collision warning is not given if the vehicle ahead of you is too close to the SUV? I am not able to turn on the Cruise Control at all.

 

[JeepCares]

Hi,

Does anyone facing this issue of Cruise Control not working and also the forward collision warning is not given if the vehicle ahead of you is too close to the SUV? I am not able to turn on the Cruise Control at all.

Hey there. I found some information in the Owner's Manual on page 144 that may be helpful to you.

In regard to Cruise Control:

"To Activate/Deactivate
Push and release the Adaptive Cruise Control (ACC) on/off button. The ACC menu in the instrument cluster displays “ACC Ready.” To turn the system off, push and release the Adaptive Cruise Control (ACC) on/off button again. At this time, the system will turn off and the instrument cluster displays “Adaptive Cruise Control (ACC) Off.”
NOTE: Fixed Speed Cruise Control (if equipped) is used without ACC enabled. To change between Adaptive Cruise Control (ACC) and Fixed Speed Cruise Control features, first turn off ACC by pushing the ACC on/off button. Then, turn on Fixed Speed Cruise Control by pushing the Fixed Speed Cruise Control on/off button."

Forward Collision Warning:

"TURNING ACTIVE DRIVING ASSIST ON OR OFF
Active Driving Assist On/Off Button To enable the Active Driving Assist system, proceed as follows:
1. Push the Active Driving Assist on/off button located on the right side of the steering wheel. The steering wheel image will display white in the instrument cluster display until the system is engaged. If ACC was previously disabled, pushing this button will activate BOTH ACC and Active Driving Assist systems.
2. If ACC was active and engaged before pushing the ADA on/off button, ACC will remain engaged and ADA will become enabled and then engaged (once all other conditions are met).
3. If ACC was not active before pushing the ADA on/off button, push the SET (+) button or the SET (-) button and release when the desired driving speed is shown in the instrument cluster display.
4. If desired, adjust the ACC distance setting by pushing the Distance Increase or Distance Decrease buttons. When all system conditions are met as described in “System Engagement Conditions” in the next section, the system will engage and the steering wheel image in the display will change to green. NOTE: Along with the color change of the steering wheel image, the “glow” effect of the instrument cluster display will also change to green when ADA is engaged."

If you follow the aforementioned steps and these features are still not working properly, we recommend a visit to your preferred dealer.

Kate
Jeep Cares

 

[Golfio]

I am having same issue sis they fix yours?

Hi,

Does anyone facing this issue of Cruise Control not working and also the forward collision warning is not given if the vehicle ahead of you is too close to the SUV? I am not able to turn on the Cruise Control at all.

I am having same issue, did they fix it?

 

[JeepCares]

I am having same issue sis they fix yours?

I am having same issue, did they fix it?

Hi, Golfio. If you plan to bring your Jeep to the dealer and need our assistance, send us a private message.

Kate
Jeep Cares