There is a TSB for this issue:Anyone have an update on the Active Noise Cancellation issue? It’s bothering me every time I drive. I’ll try the tape fix but how annoying.
I don't think this is for the active noise cancelling. I think this is for dead battery that was caused by the amp.There is a TSB for this issue:
TSB’s
Just realized my old jobs aldata login still works. Here is a screenshot of all TSBs for a 21 GCL 4x4 Let me know if you want me to post a certain one.wljeepforum.com
How can we find out for sure. I have tape over the third mic but honestly it doesn’t seem to be working.I don't think this is for the active noise cancelling. I think this is for dead battery that was caused by the amp.
That clearly is not the one for the amp.I don't think this is for the active noise cancelling. I think this is for dead battery that was caused by the amp.
I think it is connected as it requires to update the AMP for the latest software version and it seems the AMP is connected to the ANC.I don't think this is for the active noise cancelling. I think this is for dead battery that was caused by the amp.
The TSB does say it is for flashing the amp. So why would you say it's not for the amp?That clearly is not the one for the amp.
sounds logical, but with all of the complains here about the issue, has no one had it done and can comment on results? I am quite surprised. I do recognize though, this TSB was just posted 3 weeks ago, so quite possible no one made it to the dealer yet also.I think it is connected as it requires to update the AMP for the latest software version and it seems the AMP is connected to the ANC.
Because I responded to the poster that suggested that it referred to the problem of the amp depleting the battery. It does not. The amp killing the battery was a separate and distinct bulletin.The TSB does say it is for flashing the amp. So why would you say it's not for the amp?
Mine happens when idling or driving when it is too cold outside at 1500 rpm.Quick update...they applied the TSB to my truck, the bassy noise is still there. I should be clear, my rumble is when driving, not idle. Maybe the issues are not the same.
I just found this in another thread, most likely this is the issue:Quick update...they applied the TSB to my truck, the bassy noise is still there. I should be clear, my rumble is when driving, not idle. Maybe the issues are not the same.
There is a TSB for this issue:
TSB’s
Just realized my old jobs aldata login still works. Here is a screenshot of all TSBs for a 21 GCL 4x4 Let me know if you want me to post a certain one.wljeepforum.com
Mine has the bass drone sound while driving on the highway, when I let off the gas it stops.Yeah I have the same issue. Someone commented on another thread there should be a software update to fix issue.Mine
Overland L V6 with premium audio - I noticed after ignition and idling in park, the car has a very unpleasant low frequency (but med-high volume IMO) bass-like rumble which is agnostic to equalizer and even radio power/volume at 0. The noise also stops if the window is opened and resumes when closed. It's almost like it's an engine sound emulation attempt as some high end cars do but I do not see such a setting or mention in the manual.
I had that as well in addition to the drone/rumble at 1k rpm although it was much more faint compared to the 1k rpm drone. The update fixed both.Mine has the bass drone sound while driving on the highway, when I let off the gas it stops.