Jacking mode on 2022 GCL Overland

[Dano]

When in jack mode my 2022 GLC Overland, the scissor jack will extend all the way without the tire leaving the ground. Couldn’t get a straight answer from my dealer with the problem. Any suggestions.

 

[Jake22]

 

[Fabjpdspeed]

When in jack mode my 2022 GLC Overland, the scissor jack will extend all the way without the tire leaving the ground. Couldn’t get a straight answer from my dealer with the problem. Any suggestions.

It's been a while since I've read the manual. Does jack mode place the vehicle is a specified height or does it simply maintain current height setting? If it maintains height, then try lowering your vehicle and then turning on the jack mode. Just a guess.

 

[BlueSurf]

Before you applied the "jack Mode" in settings, were you sure the Jeep was in the entry/exit mode?

 

[CSmith]

I believe you have to go into the Uconnect system and turn off the air suspension. Otherwise, your tires will continue to drop as you raise it. When I get in my car later I can take a look, but I believe it will be in settings where the easy entry exit setting is

 

[mppolo9]

Here is some guidance that you may find helpful. Thanks

 

[Dano]

It's been a while since I've read the manual. Does jack mode place the vehicle is a specified height or does it simply maintain current height setting? If it maintains height, then try lowering your vehicle and then turning on the jack mode. Just a guess.

I started the vehicle and lowered it all the way then put it in jack mode and it automatically raised it to the 3rd level. I’m stumped.

 

[Dano]

Before you applied the "jack Mode" in settings, were you sure the Jeep was in the entry/exit mode?

No it was not in entry/exit mode, maybe I should try that.

 

[Dano]

I believe you have to go into the Uconnect system and turn off the air suspension. Otherwise, your tires will continue to drop as you raise it. When I get in my car later I can take a look, but I believe it will be in settings where the easy entry exit setting is

Did everything according to the manual and what the dealership said. No luck.