They are old horse stall mat's you can buy at Tractor Supply. I used to have a couple horses before I moved where I am now. I also kept my old motorcycle's on them because they stop some of the moisture coming up from the cement in the winter. Better for the tires too when I stored them.
Its a 128GB micro flash drive. All my MP3's are on it....What is in the USB slot?
Looks like a usb memory stick, likely has a bunch of mp3s on it is my guess: https://www.amazon.com/SanDisk-64GB-Ultra-Flash-Drive/dp/B077VYCV37/What is in the USB slot?
thx man. Been using same ones from autozone for 10yrs and never had 1 fail yet. Hopkins part #C1534AK6 Wired to ground via giant jumper nut and to positive via add-a-fuse after finding a fuse/power source in fuse box that's triggered only via ignition. PM me for more details if you end up starting project.I’m digging those amber lights.
Maybe a quick write up where you found them, if you like them, and more importantly - install instructions?
I may have to get one of those luggage racks now that I have the roof rack on. How is that Tyger one?Mopar Rack & amber grill lights. I3 ceramic tint on every window yesterday View attachment 540View attachment 541
Thanks!!! You have to purchase the cable from the factory connector to the unit, but everything in the box worked great. It was a bit of work to mount the knob there, but it was worth it...Most of the interior pieces are held together by clips...I mounted the control unit behind the drivers knee panel. Yes the unit does use an rj45 style cable between the knob and the main unit... I didnt even think of taking any pictures while I was doing the install.....@saleen032 That looks really good - easy to get to/adjust and super clean. Was there enough cable to reach the controller and plug/cable or did you have to extend their knob to controller wire? (looks like they use RJ-45 connectors between the knob and controller)
I'm assuming it's this one? https://www.etrailer.com/Trailer-Brake-Controller/Redarc/RED24FR.html
What tint level did you put on the windows?Mopar Rack & amber grill lights. I3 ceramic tint on every window yesterday
Honestly, I will be forever grateful if you could snap some pics of where you cut (perhaps from inside & outside vantage point so I can gauge where to cut) because this is at the tippy top of my list but dont want to botch the job. You did a great job btw.I made a cut out so I could leave my tow hook in without leaving the whole panel off.
View attachment 547
View attachment 548