WL Jeep Forum

Welcome to WLJeepforum.com! Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

What size of Receiver drop is needed for factory hitch w/air suspension

Korros1v3

Well-known member
Hopefully someone has figured this out. I am renting a uHaul trailer (small 4 x 7) and have the factory hitch installed on my Overland 2021 L. I am sure I need a receiver with a drop but I am not sure what drop I would need. Anyone have any experience with what receiver is working with their trailer?

Thank you,
 

MrBreeze

Well-known member
I use an 8" drop with a utility trailer. With the suspension in park (entry/exit height) the trailer is only slightly (not even a 1/2 bubble on a level) down at the tongue. When in ride height it is level. I'd prefer even a bit more angle/weight on the tongue.
Here's a pic - not the best, but all I had with the trailer attached.
918D4541-8378-4664-A7F5-F51FDC93C898.JPG
 

Sarge

Well-known member
It depends entirely on your trailer. I just use a 2” drop, and it works with my trailers as well as most standard full size trailers, but small utility trailers are often lower, and heavier duty trailers are often higher.

If you own specific trailers then buy for that, but if you don’t want a big hitch with an adjustable rise then just go with a standard 2” drop, it will work with the widest array of trailers.
 
Top