Search results

Hmm…I was almost positive that the weather page was part of standard Uconnect and not subscription based. I think there’s a lot of confusion even with dealers regarding the system. Can anyone else chime in on the weather page?

Does your weather page work after this update? That is the only thing that has never worked reliably for me, I’m wondering if this update fixes that.

Yep, the bracket bolt that I show backed out in the picture. To completely remove the bolt, the tensioner would have to be removed. I didn’t want to do all that, so I just backed it out and made the U shaped washer.

It’s not the bracket making the noise and I thought the same thing at first. It’s the end of the bolt against the inside of the body. The body has to flex to replicate the noise, which is difficult to do in your garage. I could somewhat replicate the noise by opening the rear passenger door...

The noise is very distinctive, it’s a metal on metal flexing sound, not a plastic rattle. The original poster of this thread was 100% right, the problem is not visible. It’s inside the welded body panel, where the tip of the tensioner bolt rubs the body panel. The seat belt tensioner does not...

It’s not that difficult, although I did break one of the snaps during removal. I epoxied it back in place before reassembly. If I remember correctly, the trim along the floor has to be removed first. Once you start removing; just feel along to the next clip and try to put your pull force right...

I’ve recently had 2 occasions where the heated seats and heated steering wheel all turn off simultaneously. On both occasions, they had been on at least 30 minutes. All 4 seats were set on low, and the steering wheel was on. They all turned back on fine. Is anyone aware of an auto shutoff...

I’ve had similar issues. 90% of the time it works like it should, but occasionally I’ll be on a trip and if I keep my hands stationary for just a minute it will alarm. It will stay like that for the trip and the next day it will be back to normal. I usually drive with one hand at 3 o’clock...

I’m asking about the bumper cover that is cut out around the hitch. This picture does not look like that.

I guess I should have said “cutout bumper cover”. From the factory, they have that. I haven’t been able to figure out if that cover is available to purchase.

Does it come with a cutout plastic panel to replace the one you removed? Or do you have to leave it all exposed? I was thinking of ordering just a factory hitch (I don’t need the wiring), but my dealer can’t figure out if the cutout panel comes with the hitch.

I would like to give a shout out to Axg1040 for this info....this is exactly what I have been chasing down for a few months now. I have a 21 GCL with 5k miles...and it started the creaking noise at the bottom of the passenger B pillar. Like he said, it was anytime the body flexed, such as...

I assume it's connected because it accepts my home wifi password. However, since all I ever see is "Connect..." I'm beginning to question if that means connecting or connected. I'd love to hear a few more comments on what they see on their screen.

I have a '21 JGL Limited. To my knowledge, I've never received an over the air update. I'm currently at build FCA-MY21.R17.99-PROD. I received this update when at the dealer for another issue a couple months ago. Is there a more current build? I have a few minor quirks with the system...but...

I would push back on leaving your vehicle while they wait on the part…unless you’re wanting to. It took 5 weeks for my screen to arrive, and they never mentioned leaving my Jeep there.

I I had a few light scratches as well. My shop did a paint correction/buff on the piano black pieces before installing the Xpel. It took them all out.

I finally got this screen replaced yesterday. It took about 4 weeks to get the replacement from Jeep. While I was waiting for the replacement, a second bubble had started on the opposite corner. Interesting fun fact…when I picked up my Jeep yesterday, I noticed the odometer had rolled back...

Yeah, those bubbles are a reflection of raindrops on the sunroof:). I personally didn’t want to try an install myself, the panels are so small and not much room to squeegee and work out the bubbles during install. My installers did a near perfect job, there’s only 1 little dot, about the size...

I bought mine directly from the Weather Tech website. When you pick the "L" version for 2021, it displays the 3 versions for the back....bench, buckets, buckets with console. You simply pick the picture that matches your setup. The part number on my invoice is 441696-1-2-3 if that helps you...

There were some posts a few weeks back about Weather Tech vs. Jeep all weather mats. I finally gave up on ever getting the Jeep mats...my dealer said his system won't let him order them until March. I went with the Weather Tech's, and found a nice Jeep logo emblem to replace the ugly Weather...