No rubbing no scrubbing.@Gio Looks good, Any rubbing issues etc ?
Love these wheels. Great choice.
Where did you buy these? I have been looking online for 22s and many sites do not carry them for the GCL.Status Alloy Titans, these are +35 but they also make a +25.
Had them ordered from discount tire. the ET35’s aren’t in the catalog yet so they just charged the same as ET25’s and then called Status Wheels and manually overrode the order in their system.Where did you buy these? I have been looking online for 22s and many sites do not carry them for the GCL.
@GC_chief - Can you help me out with what I will need to have the Speedo work correctly. I currently have 265/40/20 set up and going to go with 285/40/22 what set up will I need to purchase to make the Speedo work correctly. Thanks for any help.Stock is 275/45R21 and these are 275/45R22…hence the same sidewall with a 1” increase in overall diameter (31.7” vs stock 30.7”). Half of the increase fills the wheel well, which is why the wheel is now about a 0.5” closer to the steering knuckle. And yes, the speedo is off by 3.3% but fortunately Mopar has a sales code for folks who plus size tires. Costs about $99 unless you have a awesome dealer like mine who comps it during my first service (did the same on my JT when I jumped to 37’s).
You sure that tall of a tire will even fit? I think it will fit the front upper control arm.@GC_chief - Can you help me out with what I will need to have the Speedo work correctly. I currently have 265/40/20 set up and going to go with 285/40/22 what set up will I need to purchase to make the Speedo work correctly. Thanks for any help.
you need to go to your dealer and have them calibrate it for a 31” tire…although honestly stock is 30.5” so I’m not sure it’s worth it. Also, 265/40R18 is not an OEM size so if that’s what you’ve been running your speedo was already way off and the new tires should put you closer to stock.@GC_chief - Can you help me out with what I will need to have the Speedo work correctly. I currently have 265/40/20 set up and going to go with 285/40/22 what set up will I need to purchase to make the Speedo work correctly. Thanks for any help.
Typo- stock tires are 265/50/20you need to go to your dealer and have them calibrate it for a 31” tire…although honestly stock is 30.5” so I’m not sure it’s worth it. Also, 265/40R18 is not an OEM size so if that’s what you’ve been running your speedo was already way off and the new tires should put you closer to stock.
Damn. That looks GREAT
Your setup looks great! Just picked my wife up a 2021 Summit Reserve and she wants black wheels. What size / offset did you go with? Appreciate the info on the tire size working with QLII. That's what I'll go with myself. Even down to the Coopers. They've always been a great tire for me. Had to go with Nitto's on my 2019 Ram when I went 22" because they don't go "big" in that wheel size.Sure…starting with stock dimensions: largest oem wheels are 21x9ET50. Tires are 275/45R21. Max OD is approx 32” due to steering knuckle which curves above wheel (virtual ball joint as part of multi-link suspension) and rubbing in entry/exit mode on modes with QLII. On a limited with 18’s you could probably get away with 285/60R18’s on an offset of +35 without loosing any sleep at night. Of course if you’re up for some trim work, I believe at least one person in the forum is going with ET1 on 265/65R18’s (1.7” further out than stock).
Will a 22x10.5 fit ?22x10. 285/40/22