Recent content by MrBreeze

...in doing a test fit, even with a dropper post, I'm shy of having the height to fit the handle bars under the interior roofline. :( That pretty much explains why I didn't find any posts here regarding this. Perhaps a smaller frame mtb (I ride a large) it would fit. I can lay it down and...

While I have a hitch mounted rack, there are situations where I want to carry my MTB inside and have been considering a DIY solution using a fork mount on a 1x6 and was curious if anyone else here had done something similar? I didn't find anything when attempting various searches. (Google, yes...

Sheesh, I don't know how I missed it - even looked there - granted, it is tucked away a bit, but still, sheesh. Thanks John. I do notice that the wattage is only 150, so I'll still be needing to install an inverter with a 500W output.

Where in the interior is the 120V outlet located?

I've come to realize that the WL (at least my '23 Summit Reserve) does not have an onboard 110V outlet. My 2018 Jeep Wrangler and Ram 2500 had them, so it looks like I'll need to use an inverter - doubt a portable unit that plugs into a 12V outlet will provide much amperage to do anything more...

Frustratingly difficult to find the proper cabin air filter - Early production (12/21) of my 2022 WL - (appears to be part #68542125AA) I haven't found an online Mopar parts seller that has in stock. Living in the dust bowl of Arizona, the cabin and engine air filters get dirty quickly. While...

On the U.S. Weathertech site, they indicated the "bumper topper" was out of stock for the 2-row, so I ordered for the 3-row which I assumed would fit just as well. Installed the other day and there is a slight (1/8") gap behind the lip right near the center - don't really notice unless you run...

That was the answer! Coming from a Land Rover Defender, I was able to run the rear-most A/C fan on high to keep the dog cool, while running the rest of the cabin on auto to a temp setting. I erroneously assumed that would be the same in the GC, but with the rear seat fan controls set to high...

Good suggestion - I'll check - I may have had it on high during the summer months for my Labrador Retriever "Walter" in the back...

Auto - fan speed too fast even when the ambient temp is similar to the temp setting. Manual - lowest setting (1) isn't "low" like one would expect. Perhaps a software issue with my particular vehicle. I'll need to ask next oil change.

Does anyone have a suggestion or hack as to getting the fan speed lower? When manually set to its lowest setting (1) the fan speed is still too high and LOUD. Such a quiet vehicle, with the most noise coming not from the wind or tires, but the damn HVAC fan! Besides shutting the HVAC system...

Looks like a good solution - particularly for black and dark grey exteriors. Not sure if the lip portion that rolls down the face of the bumper cover will look odd from behind on lighter colored WL's (I have velvet red pearl) but worth a try. Thanks.

I'm in Phoenix - land of the stone chips. The glass came in on 10/26 as anticipated and installed a day later.

I just got a chip in my windshield and Safelite was out to repair and as they were cleaning out the chip, they cracked the windshield. I've been informed by Safelite: "Unfortunately, the glass needed for your appointment is currently not in stock at our local warehouses and will be coming from...

Thanks Trailrated for the video and info. I too have been considering doing some electric cutouts. Perhaps something after the resonator, but before the muffler? I need to spend some time under the WL to see what might be possible. I thought the video of the magnaflow didn't sound too bad...